Beiträge von george.ciulei

Hi Jens,

It worked, like that I could delete all the list and start over. This is most usefull, thank you very much

Hi Jens Krause,

I found that command that you mentioned, but it doesn't work for me. I select the position that I want to delete, I hit OK, and nothing happends. What could it be?. I've tried to delete all the other position that I don't need from the Dietrich's AG program but those lists are still there, I run out of ideas. ](*,) ](*,) > What Is more annoying was that those lists from the other positions worked, but not the one I want, now after I've deleted them none of them works (of course ).

I have a problem and I don't know how to solve it. In the Project Data program I have more than just my curent project inserted in the take off areas, and I don't know how to get rid of them. There are some older lists that I've made on the same project but for another position. I just want to calculate for this position, what should I do?

Zitat von Martin Gerhold

Actually the dimension in the project data program in the material base are in meter. So the panel you defined is 3.25 kilometer by 6 kilometer with a thickness of 205 meter. When the material list calculates the volume (in meter) the computer can’t handle such a huge number.

Hi Martin Gerhold,

What did you said is true also, but I've tried like that and it doesn't work, the only way that worked for me was the Der_Planer's way: no input in the material dbase for the thickness, height and length.
Thank you all for your answers

Hi Der_Planer,

I just did what you said and everything works fine now, that was it.

Thanks a lot.

I just find out what was the problem, because of what the program returned me that error. It was because of the fact that I've created a material in the material dbase and then associated with the panels that I had. I tryed to change the material and the lists works just fine. But my next question is what I did wrong. You can see in the attached image the settings that I introduced for this material.

Sorry if I sound dumb, but why few weeks later and not now? Is there an issue that I have to keep in mind?

First time I had the Dietrich's v504 installed, and then I've upgraded that with tha versions 6.01 and so all the data bases and setting migrate to the new version. But now I have some problems with the prgram and I presume that a reinstall will do the trick. Plus the Project Data 6.01 doesn't even start now, it just freeze when the logo appears. So I don't know what else to do. Maybe the loss of the setting will not be such a big problem, but I have to do something or else I cannot use the program, or maybe you have another suggestion, I'm open for any other suggestion. ](*,)

I want to uninstall Dietrih's and then to reinstall it. First things first: how do I uninstall de program. I cannot find it in the "Add/ Remove Programs", and I don't find anywhere the uninstall option, not in the Start-Programs, not in the Dietrichs05 folder. What should I do?
And another thing, how can I save all the data bases, and the setting that I've done? This could be very helpful.

in the Project Data Program when I edit the panle list the program respond with an error message, which I don't know what it means. Can anyboy give me some hints on how to resolve this problem. The message it can be seen in the attached image.

Thank you

Where can I find in the Structural Calculations program of Dietrich's the steps by which the program calculate. I want to know if there is a calculation breviary. And maybe, if is not to much, a tutorial for this module, I have one but it's in german. :pray:

Thank you

I am trying to edit a wall in the Wall Design Module, and I put a panel that now I wish to split into 2 pieces with a gap between them. It is possible, or I have to make them separetly?

Thank you for your quick answer Der_Planer, this is most helpful.

This is the sketch of the stairwell in plan. I don't know exactly what are the steps so I can control properly the dimensions and the output of the final stair so the program keeps gives me an error and shuts down. You can help me with some hints on how to do it?

Thank you.

I have a little problem with the Stairwell command (6-3) 8O . Is there some kind of tutorial that I can read or watch so that I could create a stair in the way I want? If is there one , where can i found it?
Thank you

I have a question. How can I move, or better, save, a new project in a directory I chose. :oops:

Ok, got it, Danke

Hy Jim

I looked in the library and I have some object there. But I was wondering if I can get some more. For example I don't have any object related to bathroom, or kitchen, in general some tables ,chairs, stuuf like that, for architecture. I know I don't have the full version of D-CAM, and maybe there is the problem.

Thanks for the reply.

Is there a an object library that I can download and use it in D-CAM? I could use some new object, let's say, some bathroom or kitchen objects. The directories where I should find all of this are empty. I know that I don't have the full version of D-CAM, but I was wondering if there is o possibility of downloading any of this.

Thanks. :lol:

I have a question about the term "timber grade"- e.g. C24/C24M, what is the meaning of it. Where can I find this Standard. I am from Romania, and here we have other Standards, so where can I find an equivalent of this.

Thanks