Thank you for your feedback. I have to give some more back story to this problem, and the reason I decided to not put it into the Beta section.
Working the beta version, I made the sections and views, complete with the terrain contours lines, and then go to make a sectional drawing (1-01-5). When I press OK, it gives me the attached error and crashes. (The screenshot is of the standard version, but it was the same the first time in beta) I closed everything and tried it in the standard version. Same result. So I figure this has nothing to do with the beta version.
This has happened a few times previously in the standard version as well, so I decided to try to change something in the section and try again. I suspected it was the terrain contour, since it had caused some problems in the past. So I removed the TERRAIN layer definition in 'dimensioning/labelling', recalculated the view/section, and tried 1-01-5 again. Now it worked and produced a drawing block for me. I inserted into a drawing template in D-CAD. Then I re-defined the TERRAIN layer in 'Dimensioning/labelling', recalculated the view/section, and it responded correctly in the Model. So I recalculated the drawing block 1-01-3, and updated the inserted block in D-CAD. And this is the point I was at yesterday when I made my first post.
I hope this helps to explain some things, and let me know if you need more screenshots or the packed position.
And as to the German, yes, I am fluent. But a), I figured this was not related to the Beta version, and b) I use the English version so figured my posts belong in an English section. Correct me if I'm wrong. I'll find my comfort in deciding on the correct spot to post over time