Beiträge von Stephen

Diese Seiten wurden speziell für die Benutzer unserer Software installiert, um sich untereinander und mit uns, Informationen, Neuigkeiten, Bilder und Dateien auszutauschen. Egal ob Dietrich's Abbundprogramm oder DC-Statik, hier sind alle Holzbau Profis richtig. Natürlich auch die ohne Holzbausoftware ;)


Wenn Sie selbst aktiv werden wollen, melden Sie sich unverbindlich mit einem Benutzernamen und einem Passwort an. Klicken Sie hierzu auf der linken Seite den Punkt "Benutzerkonto erstellen" an.


Wir wünschen unseren Besuchern einen informativen und angenehmen Aufenthalt bei Dietrich's FIX


Ihr Team Dietrich's Online - Holzbau ist unser Programm

  • K2 machine files

    We use the Hundegger K2 with the 5 axis head. We have always used the K1/K2 Hundegger in the machines list. I now see there is an HH K2 5axis. Should we be using this, what is the difference?


    Are you also working on machine files for the Hundegger K3?


    Steve

  • I need help with sorting my project

    Hi


    Thanks for those replies. The reason I want to do this is that we are having problems with the finished product as it comes off of our Hundegger K2 machine. We are using green oak and planing it to size before it goes into the K2. The drillings in the mortise and the tenon do not line up properly in certain circumstances and we have decided that until we can rectify this we will drill the tenons by fitting the building together.
    I know I can go in and remove the drillings I want but it is much easier to do this in the Hundegger software. Therefore when I fit the components together before it goes to site I need them marked differently as they will only then fit in one position. I wanted to use the marked up drawings from D-CAD without having to go in and change all the numbers - but I can if I have to.


    Basically I was wondering what the easiest way was to do this in the short term. I do not really want to delete the drillings from the project as we may use it again or we may sort the problem fairly quickly.


    Thanks


    Steve

  • I need help with sorting my project

    Is it possible to specify that you want everything in a certain MOS to have a different sorting number even though certain peices might be exactly the same. I only really want to do this for the walls MOS and none of the others.


    Regards


    Steve