Beiträge von Thorvald

Diese Seiten wurden speziell für die Benutzer unserer Software installiert, um sich untereinander und mit uns, Informationen, Neuigkeiten, Bilder und Dateien auszutauschen. Egal ob Dietrich's Abbundprogramm oder DC-Statik, hier sind alle Holzbau Profis richtig. Natürlich auch die ohne Holzbausoftware ;)


Wenn Sie selbst aktiv werden wollen, melden Sie sich unverbindlich mit einem Benutzernamen und einem Passwort an. Klicken Sie hierzu auf der linken Seite den Punkt "Benutzerkonto erstellen" an.


Wir wünschen unseren Besuchern einen informativen und angenehmen Aufenthalt bei Dietrich's FIX


Ihr Team Dietrich's Online - Holzbau ist unser Programm

  • Looking for a laptop.

    And the Danish for tastatur / keyboard is: Tastatur... :lol:


    The screen resolution is 1280x800. I know the icons and text might get smaller etc. etc. - but please remember that I am not talking about a desktop replacement. My desktop is with 19" flat screen - I don't remember what resolution, probably 1280x1024, so the resolution width is the same.


    I don't think icons will dissaper behind the right margin, but perhaps they will regroup. But that doesn't matter so much for me. I don't think I am going to use it very much for drawing - but I am going to the Philippines in 1 month in July, and I was thinking I could use some of the time to work. I have had a 12" laptop (some years ago) that I used without problems also for autocad - but at that time I had only laptop and no desktop computer.


    No mouse and normal keyboard for laptop - why not it is almost the same and of course I will use normal mouse, and I have a wireless keypad for numeric use, that I can use with the laptop. I don't think it will be a problem. And again: It is not a desktop replacement.


    So again (and again) I ask: Is the graphics in this laptop good for Dietrichs work??


    See: http://nordic.lge.com/dk/prodm…amp;model=Select+a+model#


    See also M1, that could be an alternative: http://nordic.lge.com/dk/prodm…M2FTV3&model=NOTHING#


    But I prefer Z1 for mobility.

  • Looking for a laptop.

    Why you want big screen? This is not for desktop replacement, but to bring on travel. And 12" is big enough for drawing and serious working - to my opinion. So is the graphic card in the mentioned LG good for Dietrichs?

  • Drawings from roof design.

    I am drawing roof to be made of several seperate elements (cassettes), so I have a building outline for each element. And I want a drawing for each element, exactly as I can from ceiling design. How??!!


    I don't like roof design very much, it is more difficult to work with than ceiling design. - I would like it to be more like ceiling and wall design. Maybe the possibilty to choose between to roof design modes: The traditional mode, and a element mode: This could perhaps be done by selecting a roof outline you want to work in - and then you work in that horizontally, and not with the slope of the roof.

  • Special cuts in rafters.

    Oooohhh yyeeesss, that distance - of course - I was blind because I always use to cut to 0 of the distance, Ha! I learn a few things today, and the program have also surprised me today. I found out that when making drawings of walls and ceilings, I can have the program to make drawings for all walls in the house at once, in stead of opening each wall, make drawing, open next wall.... I didn't know that.... :oops:

  • Special cuts in rafters.

    I found out making the horizontal and vertical cuts with the distances - I did it in roof design, with defining cutting lines with point to point in side views, defining these points with reference points. It would be easier to make these cuts, if it was possible to draw assisting geometry in side view in roof design.


    But help me in more detail with the birth mouth, it doesn't work for me. Step by step, what to do?

  • Special cuts in rafters.

    This hardcopy program seems useful!


    About my cuttings - Der_planner and perhaps also Jason: Your solutions cuts directly to fit exactly to fit the I-beam, I don't want that - but lets see in 15 minutes, if I get it. :)

  • Drawings from ceiling designs.

    Well, Vilmantas - I thought I could make the section drawing in ceiling design in the same way as in wall design - and I thought I might be doing something wrong or there was something wrong with the program or settings. Then later I found out by my self that a section view from D-Cam would do what I wanted.