Beiträge von Kayaker

Der_Planer,

Thanks for the guidance I was able to remove the OSB from the gable. Now I'm trying to create the overhang at the location shown on my 1st attachment by doing 4-4-1 move line I receive a message optional function? My second attachment shows a plan view of the roof.

Kayaker

I would like to add an overhang to my roof at the location shown see attachment. And also remove the OSB from the gable area it appears this roof surface wrapped into the gable area. Can anyone help?

Thanks!

Kayaker

Thanks for the help. The message I was receiving was on my laptop and what I didn't do was copy a newer database version from an other PC to my laptop.

Message says: project dbase was saved with an unknown version. I'm not sure what happened and what I should do to correct this. :o

Der_Planer,

Thanks for the wake up call; I took another look I found out that I was extruding my metal shape in the Y direction when I should have been extruding the width.

Kayaker

I did a drilling which turned out fine.I would like to think I'm doing it the same as before but now I am receiving a message wrong process. :roll:

Kayaker

Thanks ! Roger / Der_Planer , I got it.

On my laptop, when I select a point and perpendicular drilling, I can see the drilling process but no hole appears. On my other machine doing the same I get the hole? Does anyone have any idea why this may be?

Is there a print out or file of standard layers automatically created in Dietrich's this would help to set up a template.

Thanks Der_Planer and Jim,

Is this information available in any of the other modules other than PlanCad?

I have two posts drawn in D-wall I want to copy the post in D-cam and do a copy-distribute in the Y direction. I then receive an error! Exception invalid float operation. :roll:

Is it possible to find the length of an assisting geometry Arc?

Joachim,

The function 3-8-4 worked !

Thanks!

Kayaker

I want to cut a slot in the end of my beam to accept a 3/8" x 6" flat. I'm wondering what command / tools to use to accomplish this.

Thanks!

Kayaker

Jason,

It worked great !

Thanks

Kayaker

I took two steel profiles and deleted the processes in order to unite them then decided I wanted to make the united shape longer by cutting it. Now I noticed the command will not " cut it longer " :roll: Any reason to why I'm unable to cut it longer?

Thanks Joachim! You are absolutely correct, I happen to have two very similar roof surface properties.

I have a roof profile that contains a "collar beam" when I place the collar beams into my roof, my roof build up / panel changes at the peak and eave. I'm attaching the way the panel was before inserting the collar beams and the goofed up panel after the collar beams were inserted. Any quick fix to the roof build up / panel? If I delete the panel.... won't I have to start from the very beginning and enter all rafters and collar beams?

I want to be able to add an attachment to my message body but I'm unable to do so :?

Jason,

That is exactly what I am after. Thanks for the picture attachment it is very helpful.

Kayaker