I'll check and see when visiting hours are, and see how he's doing....
Beiträge von Jim Rogers
Bitte deaktivieren Sie Ihren AdBlocker für unsere Webseite.
Wir sind auf Werbeeinnahmen angewiesen, um dieses Projekt aufrecht halten zu können.
Wir sind auf Werbeeinnahmen angewiesen, um dieses Projekt aufrecht halten zu können.
Bitte deaktivieren Sie Ihren AdBlocker für unsere Webseite.
Wir sind auf Werbeeinnahmen angewiesen, um dieses Projekt aufrecht halten zu können.
Wir sind auf Werbeeinnahmen angewiesen, um dieses Projekt aufrecht halten zu können.
(Dieses Fenster erst in Sekunden schließen!)
Ansonsten wird der Hinweis beim nächsten Seitenaufruf erneut angezeigt.
Ansonsten wird der Hinweis beim nächsten Seitenaufruf erneut angezeigt.
Diese Seiten wurden speziell für die Benutzer unserer Software installiert, um sich untereinander und mit uns, Informationen, Neuigkeiten, Bilder und Dateien auszutauschen. Egal ob Dietrich's Abbundprogramm oder DC-Statik, hier sind alle Holzbau Profis richtig. Natürlich auch die ohne Holzbausoftware
Wenn Sie selbst aktiv werden wollen, melden Sie sich unverbindlich mit einem Benutzernamen und einem Passwort an. Klicken Sie hierzu auf der linken Seite den Punkt "Benutzerkonto erstellen" an.
Wir wünschen unseren Besuchern einen informativen und angenehmen Aufenthalt bei Dietrich's FIX
Ihr Team Dietrich's Online - Holzbau ist unser Programm
-
-
I heard that Woody is on the mend and should be back out of the hospital soon.
He is making a miraculous recovery. -
Peter;
While Woody is in the hospital getting his head and other body parts examined; I have these other people you could use.
See picture and attached packed position. -
Peter, I'll check out the ones I have and see if they work with V11 first.
Jim
-
I have several more of him, if you want them just let me know.
I have him with his hand against a post, standing alone, and one with him carrying a framing square.
I also have this one with him carrying the beam.
If you had him before, you just need to add him to your library and move that object forward to your V11 library. -
There are free virus protection softwares out there. He should search for one and use that, if cost is an issue.
-
Sometimes you just have to replace the beam and do it again.
-
You can also just change the number in the length column to the longer length. copy that new length and paste it into all others lines of the same item.
-
Good luck with your drivers....
-
When ever you install something new like a driver or other program updates, it is best to create a restore point before hand. That way if something doesn't work right you can "restore" to a point before hand where everything did work right.
I do this with all MS updates. -
There should be an option when you select the graphics card information box where there is the button to roll back driver.
-
You may have to roll back your driver if the new one causes problems.
-
The folder (WINVOR) contains some files needed by the program. These files or folders should not be modified as it could affect your program’s performance. WINVOR/ENG can be copied and moved forward to a newer version.
-
If there is not a lot of tension on that assembly then that would work. If there is tension maybe a spline through the king and into each piece would make it stronger, if you use a hardwood spline.
-
Something like this, only the door slide past each other:
-
One solution is to do the same thing using a different function, like notch.
There is more than one way to cut a timber in the program process box.
-
I now understand the "why".
As to an easier solution than 1) mirror 2) delete original, 3) move; I can't think of anything.
In D-CAD2d you can just pan the viewport to bring it back to the proper position on the page instead of move, after you have deleted. But I guess that would depend on what you are mirroring.
Other drawing programs do have "reflect" with an option for copy or not.
Until such an option is added, you may have to do it your way. -
Any process with a "$" is still "attached" to another timber so that it will stay connected if you move the timber. You have to break that connection in order to move it in the process list, or edit.
-
I think that is because it is part of the process just above the one with the ">". You need to highlight the joint above and explode that joint. Then highlight and try to move up.
-
I guess my first question would be to ask why do you need to mirror everything?