Logic block insertion

ArgentaHans · 15. Januar 2015

Hello Dietrich's Gurus.

Question 1 What does the room box in function 1-7-1 do? How does one make it function as intended? I see in Wall Properties interior & exterior room limits but don't understand how to use them?

Curious about this feature. Seems it could be helpful on the architectural side.

Question 2. What causes my logic blocks to be inserted above the floor?
png attached.

Thank you.

Joachim Neumann · 16. Januar 2015

The room box shows the room information when you used the optional functions of the menu 5 to define rooms.

The problem with the logic blocks is strange. There must be a coordinate system with a "wrong" height but without the position I cannot say more.

ArgentaHans · 19. Januar 2015

Thanks Joachim.

I am modeling the topography of the site using ceilings. This is what appears to be causing my problem. I deleted the ceilings and the logic blocks are inserted at the correct elevation.

Any suggestion on how to either model my topography or how to insert logic blocks at desired elevation?

Joachim Neumann · 20. Januar 2015

Activate the panels of the ceilings in DICAM and select the function 2-08 object information. Change all activated volumes.
In the dialogue box select another item number and select your texture. Now close with Ok.
Then attach the volumes to another Building MOS (6-4). I would use the D-CAM: Free Design.
In this moment you should have a copy of the volumes in the DICAM MOS and you can delete the ceilings without losing the panels.

ArgentaHans · 20. Januar 2015

Thank you Joachim, works nicely.
\:D/

Logic block insertion

Jetzt mitmachen!

Teilen