Hello,
maybe is possible to design ceiling elements in diferent directions?
Thank You.
Diese Seiten wurden speziell für die Benutzer unserer Software installiert, um sich untereinander und mit uns, Informationen, Neuigkeiten, Bilder und Dateien auszutauschen. Egal ob Dietrich's Abbundprogramm oder DC-Statik, hier sind alle Holzbau Profis richtig. Natürlich auch die ohne Holzbausoftware
Wenn Sie selbst aktiv werden wollen, melden Sie sich unverbindlich mit einem Benutzernamen und einem Passwort an. Klicken Sie hierzu auf der linken Seite den Punkt "Benutzerkonto erstellen" an.
Wir wünschen unseren Besuchern einen informativen und angenehmen Aufenthalt bei Dietrich's FIX
Ihr Team Dietrich's Online - Holzbau ist unser Programm
Hello,
maybe is possible to design ceiling elements in diferent directions?
Thank You.
In Floor Decks 3-02 (Edit Floor Deck - Orientation, Span)
You can define different ceilings in one floor. Each ceiling for the direction of the elements you need.
Hello,
I still don't understand how to define different ceilings in one floor.
Please help me, attached file.
Go to domain "floor decks". There you already defined one floor deck. Change this floor deck and define its outline without the right area. Then define a second floor deck for the right area of you ceiling. This second floor deck should have a main direction rotated 90°.
Hello, how rotate a main direction 90 degrees?
Thank You.
Hello, attached file. Please tell me how to define roof elements in other direction? The direction need as green line.
In the ceiling the orientation of the elements is always in the direction you see in your printscreen, which means parallel to the X axis.
If you need it in the other direction you have to change the orientation of your ceiling. You can do this in domain ceiling with the function 3-02.
Yes, I know about ceiling, but how about roof? There are posibble to define roof elements in other direction?
We are in a "ceiling elements" thread and I didn't realize that you speak about roof faces.
Yes in roof elementation you can define elements in the other direction. In the dialogue box where you enter the maximum width of your elements you should see the two buttons which allow to define elements in X or Y direction.
This is a functionality since version 16.01
With older version 14, no way to do that?
No, no way.
maybe is possible to rotate all buiding?
This is possible with function 2-02 in domain "Floor plan".
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!