Ceiling timbers in a wall - HELP!!

Diese Seiten wurden speziell für die Benutzer unserer Software installiert, um sich untereinander und mit uns, Informationen, Neuigkeiten, Bilder und Dateien auszutauschen. Egal ob Dietrich's Abbundprogramm oder DC-Statik, hier sind alle Holzbau Profis richtig. Natürlich auch die ohne Holzbausoftware ;)


Wenn Sie selbst aktiv werden wollen, melden Sie sich unverbindlich mit einem Benutzernamen und einem Passwort an. Klicken Sie hierzu auf der linken Seite den Punkt "Benutzerkonto erstellen" an.


Wir wünschen unseren Besuchern einen informativen und angenehmen Aufenthalt bei Dietrich's FIX


Ihr Team Dietrich's Online - Holzbau ist unser Programm

1. offizieller Beitrag

    By a mistake a have moved ceiling timbers to a wall in MOS (I think working in MOS is very dangerous?). I was trying to copy the timbers in the one ceiling to another ceiling - but wat actually happened is that the ceiling timbers is now attached to walls. When I in MOS try to move the ceiling timbers from the wall back to the ceiling it doesn't work - but moves to another wall, that I have not checked in MOS. Why??


    Maybe I am doing something wrong - exactly what boxes should be checked, unchecked and grey in MOS in order to move the timbers to the ceiling??

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    • Offizieller Beitrag

    When you copy beams to another wall or ceiling, then be sure, that the MOS of the destiny wall (or ceiling) is actual. While copying, the program asks if MOS shall be changed: if YES, all beams will get all actual MOS. If NO, they will keep all MOS they have already.


    Changing MOS:
    - select all beams, that shall get another MOS.
    - choose 6-4 6-5 or 6-6
    - set the cursor onto the correct MOS name (for exmpl. gf1_wall2), the choice is shown with blue background.
    - click on elements-ADD


    now your beams are in the correct MOS.

    So in my case the beams from the ceiling is in GF 1 wall 43 - in MOS that has a grey check in the check box. The GF 1 ceiling 1 is not checked.


    There are three columns that can be checked. Should I check only in the middle column for GF 1 ceiling 1 and leave the check mark in wall 43 as is - and then add??


    See my pictures below.

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    Hmmm :-k I think now I did move the ceiling timbers away from the wall and from any wall (except from one problem - but first things first). I have looked through all walls and now there is now ceiling timbers in them.


    ... But where is the ceiling timbers. I can see it in D-cam and in ceiling design in the sections but the timbers is not shown in the plan??? It is there because I can "blind choose" a beam to change section t.ex. as you see in the picture.

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    Oh yes - if it has nothing to do with all the little checkboxes, then I did not really understand it!! (but it works to some extend). But well never mind.


    I should just activate the timbers in d-cam go into MOS choose my GF ceiling 1, highlight it, and "ADD". I will try. No - it is still invisible in the plan of ceiling design - but it is there as I can see it in sections and in D-cam.

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    Ok - if I use shade timber view then I can see it in the plan. But why I cannot see it with normal view??

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    Yeees - restart program - and now it is normal!! :lol:


    But still there is something wrong with wall 47. The slices from the ceiling -1 and 1 are here in wall 47...

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    • Offizieller Beitrag

    Slices cannot belong to another element as where they are created. Notice, that slices are not material, but only form shapes.
    I think you mean the plates (OSB...). Now, how did you enter them into the ceiling? when you did it together with creating the ceiling (with the little checkbox for material) then only recalculate the ceiling. The program will reset the MOS automatically. Second way: change MOS in Dicam.

    Well there is no panels / OSB at the ceiling only the timbers. And it seems like the slices appears two times when I see in preview in MOS, it is both in the ceiling and in the wall - strange. I think I will just delete that wall and make a new wall.

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    Zitat von Der_planner

    Maybe your computer wants a weekend


    Maybe - but I don't have time for that :lol: - I just want to be finished with this house - and it is close now!


    Thank you for your kind help - I appreciate it! :grinning_squinting_face:

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden