Template

Diese Seiten wurden speziell für die Benutzer unserer Software installiert, um sich untereinander und mit uns, Informationen, Neuigkeiten, Bilder und Dateien auszutauschen. Egal ob Dietrich's Abbundprogramm oder DC-Statik, hier sind alle Holzbau Profis richtig. Natürlich auch die ohne Holzbausoftware ;)


Wenn Sie selbst aktiv werden wollen, melden Sie sich unverbindlich mit einem Benutzernamen und einem Passwort an. Klicken Sie hierzu auf der linken Seite den Punkt "Benutzerkonto erstellen" an.


Wir wünschen unseren Besuchern einen informativen und angenehmen Aufenthalt bei Dietrich's FIX


Ihr Team Dietrich's Online - Holzbau ist unser Programm

1. offizieller Beitrag

    I 'm doing a wall drawing I then receive a message that the template does not have any viewports available. I checked my template and it does have a view port. Why would I receive this message?


    Kayaker

    Hi Der_Planer,


    The template has a viewport with a 1:0 scale. I'm able to zoom one viewport and verify the scale in properties. I even changed the viewport scale and still receive the same message. If I change the viewport scale to 0.000 I do not receive the message and in D-Cad the drawing sizes it self to fit the template. My question is, is it possible to have a template with a 1:0 scale and send drawings to it?


    Kayaker

    Hi Der_Planer,


    I tried sending a single beam drawing to the template but received the error message. I did get a wall drawing with another template, and was able to open up a drawing storage and insert it into the template set at 1:0. It appears you cannot start off with a template having a viewport with a 1:0 scale and send drawings to it.


    Thanks!


    Kayaker

    Hi Kayaker,


    Just so we are clear, all previous template work we have done together had a scale of 0 as seen in the attached picture. This allows a drawing to be automatically blown up to fit just inside the edges of the view port.


    Please double check that your view port's scale is set to 0 by starting a new drawing in 2D and select the template that you would like to use. Is the scale set to 0? If not change it to 0 and save this drawing as your new template. Now go back to the construction program and try outputting a drawing to this template. Let me know how it works.

    Hi Jason,


    With all templates set at 0.000 everything is fine. I thought I would be able to create a template from the get go, at a 1:0 scale but I guess that doesn't work. This template would be used for full scale drawings being sent to a CNC machine.


    Thanks!


    Kayaker

    Hi Kayaker,


    One more item to clear up. When we say a scale of 1:0 we mean a scale of 0.000. I you want a scale of one to one we show it as 1:1. When you output a drawing you have three choices beside "Round Scale" as seen in the picture below.


    1. None = No predefined scale meaning that the scale will automatically be chosen to fit the drawing into the paper size.


    2. Value = You can predefine the scale so it rounds to the closes number set. e.g. if I set the value to 8 the program will automatically fit the drawing on the paper size and round up to the closest scale of 8's. 8,16,24,32,40,48, etc.


    3. Fixed Value = The drawing will be scaled at the exact value you select.


    If you wanted a scale of 1:1 then you would input 1 under "Fixed Value". Depending on what you would like to display with a 1:1 scale you may need a very large paper size!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden