Current View Port

Diese Seiten wurden speziell für die Benutzer unserer Software installiert, um sich untereinander und mit uns, Informationen, Neuigkeiten, Bilder und Dateien auszutauschen. Egal ob Dietrich's Abbundprogramm oder DC-Statik, hier sind alle Holzbau Profis richtig. Natürlich auch die ohne Holzbausoftware ;)


Wenn Sie selbst aktiv werden wollen, melden Sie sich unverbindlich mit einem Benutzernamen und einem Passwort an. Klicken Sie hierzu auf der linken Seite den Punkt "Benutzerkonto erstellen" an.


Wir wünschen unseren Besuchern einen informativen und angenehmen Aufenthalt bei Dietrich's FIX


Ihr Team Dietrich's Online - Holzbau ist unser Programm

1. offizieller Beitrag

    Hello,


    When a view port is highlighted in green it's current, while working in this view port why does the question come up each time you want to use a new tool is this the correct view port? It would be nice if the view port was activiated this question would not be asked.


    Kayaker

    • Offizieller Beitrag

    This question just appears if you pick a point in an area which belongs to more then one window. If you have more then one window but you pick a point which just belongs to one window the question does not appear. So the question is very good. If the program would not ask you should have to switch the window each time you want to work in another window.
    A lot of people for example want to move the texts in different windows. So you just start the function and you are able to move texts everywhere on the drawing.
    Another function can help you: With the function 7-8 you are able to zoom one window. In this moment you just see the content of this window and no question will disturb you. With the same function (7-8) you switch back to the whole drawing.

    Viele Grüße,
    Joachim Neumann (Dietrich's Technology GmbH)
    Software für den Holzbau, Abbund, Holzrahmenbau, Blockbau, Ingenieurholzbau und für die Fertighausindustrie

    Is it not so that if you do a function inside the main window, no questions are asked? Only if you do a function inside secondary windows you will be asked. That's how it works with me.

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    If you want to eliminate the asking of the question select to work in one view port. This makes things faster as there are less mouse clicks to "ok" something......

    Jim Rogers
    Sneads Ferry, NC, USA


    Version 24.01.4, 23.01.4, 22.02.2, 20.02 13.04, 12.03, 11.06, 10.02, 9.05, 8.04, 7.03, and 5.05

    Hello,


    While on the subject of zooming one view port I was zoomed in on one view port and created a library element while accessing the library element the program stopped responding. Could the program not be responding because the library element was created while in the zoom one view port mode? I was also capturing a hatch with my library element could this have caused the program to stop responding? :roll:


    Kayaker

    • Offizieller Beitrag

    I do not realy know it because I cannot reproduce the problem. I think the problem is the hatch because I think I remember that we had a problem with the hatch in the library. But this was some months ago.

    Viele Grüße,
    Joachim Neumann (Dietrich's Technology GmbH)
    Software für den Holzbau, Abbund, Holzrahmenbau, Blockbau, Ingenieurholzbau und für die Fertighausindustrie

    Hi Joachim,


    I didn't go back and try to reproduce the problem but I have a feeling it may have been the hatch.


    Thanks
    Kayaker

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden