I may have inadvertently transferred something I shouldn't have from a v8 work environment to v9.02. I can no longer open D-CAD. Is there a way to go back or must I reload v 9.02?
Work Envt data transfer mistake?
Bitte deaktivieren Sie Ihren AdBlocker für unsere Webseite.
Wir sind auf Werbeeinnahmen angewiesen, um dieses Projekt aufrecht halten zu können.
Wir sind auf Werbeeinnahmen angewiesen, um dieses Projekt aufrecht halten zu können.
Bitte deaktivieren Sie Ihren AdBlocker für unsere Webseite.
Wir sind auf Werbeeinnahmen angewiesen, um dieses Projekt aufrecht halten zu können.
Wir sind auf Werbeeinnahmen angewiesen, um dieses Projekt aufrecht halten zu können.
(Dieses Fenster erst in Sekunden schließen!)
Ansonsten wird der Hinweis beim nächsten Seitenaufruf erneut angezeigt.
Ansonsten wird der Hinweis beim nächsten Seitenaufruf erneut angezeigt.
Diese Seiten wurden speziell für die Benutzer unserer Software installiert, um sich untereinander und mit uns, Informationen, Neuigkeiten, Bilder und Dateien auszutauschen. Egal ob Dietrich's Abbundprogramm oder DC-Statik, hier sind alle Holzbau Profis richtig. Natürlich auch die ohne Holzbausoftware
Wenn Sie selbst aktiv werden wollen, melden Sie sich unverbindlich mit einem Benutzernamen und einem Passwort an. Klicken Sie hierzu auf der linken Seite den Punkt "Benutzerkonto erstellen" an.
Wir wünschen unseren Besuchern einen informativen und angenehmen Aufenthalt bei Dietrich's FIX
Ihr Team Dietrich's Online - Holzbau ist unser Programm
-
-
What happens if you try to open D-CAD?
(Is that the 2D program for the drawings? I do not know the english names of the moduls.) -
Nothing happens when I try to open d-cad (the 2D program). There is no error message, it just doesn't start. I've tried starting it with 1-01-1 from D-CAM and by trying to open a drawing in Project Administration.
-
Did it work before with version 9.02?
Or did it never work since you installed 9.02? -
It worked fine with v 9.02 until I did the Work Environment data transfer.
-
Peter,
Do you have another work environment that you could open?
If not, have you tried making a new work environment?
Go to 1-6-2 in DICAM, then click the settings box in the top left hand corner.
Then, make a new directory and name it "test".
Then, open in it in DICAM and try again to run DCAD.
This will at least tell you if it is a problem with your specific work environment, or if the problem is related to something with all work environments.
dan
-
Thanks for the suggestion, Dan. Unfortunately I can't get DCAD to run with any of the work environments.
Peter -
Do you have this problem in all your projects or just in a single one?
Did you close the whole program and restart it?
Could you please try to start the program from project administration without opening a drawing. Please do that by selecting a normal position and then use the numbers 4-2. -
The problem is in all projects.
I have tried closing the program and restarting as well as shutting down the computer and restarting.
It won't open with 4-2 from project administration either. -
Could you please load the work environment "ENG2009" and try again?
-
I tried with "ENG2009". DCAD still won't open.
-
Now I do not have any other idea.
Please reinstall the program. You can do an update installation. -
Thanks for the suggestions. I reinstalled yesterday and all works fine so far.
Peter
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!