Line Weight Setting

Kayaker · 19. Dezember 2007

Where does one setup a preferred line thickness so that when drawings are sent to plancad 2D, "beam lines" come in at the preferred line thickness? This would eliminate the need for changing various lines each time.Weight

Der_Planer · 19. Dezember 2007

You can define line thickness in Plancad layer menu and save the empty drawing (with all settings) as a template.

Joachim Neumann · 19. Dezember 2007

The default value for line weight can be set in dialogbox 1-7-1.
The idea of Planer too works fine. With this idea you can set different line weights for different layers.

Kayaker · 18. Februar 2008

Is there a print out or file of standard layers automatically created in Dietrich's this would help to set up a template.

Jens Krause · 18. Februar 2008

Hi Kayaker,

the easiest way to make a drawing template with the necessary layers text styles etc. is to use an existing drawing. For example, if you want to make a template with altered layers for the rafter-plate drawing you do the following steps:

1. Create a rafter plate drawing
2. Change the layers, dimension styles, text styles, page layout etc.
3. Delete all drawing objects (lines, points) from the main view port
4. In the properties of the view port, set the scale of the view port back to 1:0
5. Save the drawing as a template

Best regards,

Jens

Line Weight Setting

Jetzt mitmachen!

Teilen