Problems with roof. Help!

Diese Seiten wurden speziell für die Benutzer unserer Software installiert, um sich untereinander und mit uns, Informationen, Neuigkeiten, Bilder und Dateien auszutauschen. Egal ob Dietrich's Abbundprogramm oder DC-Statik, hier sind alle Holzbau Profis richtig. Natürlich auch die ohne Holzbausoftware ;)


Wenn Sie selbst aktiv werden wollen, melden Sie sich unverbindlich mit einem Benutzernamen und einem Passwort an. Klicken Sie hierzu auf der linken Seite den Punkt "Benutzerkonto erstellen" an.


Wir wünschen unseren Besuchern einen informativen und angenehmen Aufenthalt bei Dietrich's FIX


Ihr Team Dietrich's Online - Holzbau ist unser Programm

    :cry: I am having problems with this roof. I cannot see the roof slices, and I cannot see the roof calculation in 3D and I cannot put timber into the roof elements.


    The roof is divided into several prefabricated elements. I hope you have some ideas of what to do!!?

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    Ich antworte in deutsch, da mein Englisch sowieso keiner verstehnt :cry:
    Mit geänderter Dachflächenausführung gehts, liegt wohl daran!

    Gruss
    wutzernst

    Thank you - but I don't have tiles and battens in my roof. It should work without - it normally does. But if it works, I can finish my job... cheeting, but who cares, if it works...? ;)

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    No it doesn't help - if I go to roof design, and want to put in a ridge plate (a HE220B as in the ceiling) it says that no ridge lines are found. So this trick you showed, doesn't make any difference at all.


    So now what? Other good ideas?

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    Zitat von doug

    tiles and battens are in the roof surface of your project.


    He, he, what I meant is that the actual house is not made with tiles and battens, but with OSB and bitumen roof. ;)

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    I have still not found a solution - but now I think it is time to enjoy Saturday evening. So if anyone comes up with a solution, I will be very happy. So perhaps I can make the roof tomorrow.

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    I think the problem comes with the lot building outlines without distance. I've checked it with one roof surface, so works good. The definition of the you can make in roof design with 7 (Systems) or you can work with with MOS elements / package in Dicam (6-6).


    Regards from Italy

    Gruss Mammut

    Ok - Mammut. Thank you for your answer. and you might be right. Because, I have done this before (working with roof elements in contrary to just work on on the whole roof). And in that case I put 5 mm between the roof building outlines, so I had a 5 mm tolerance between the elements. I could do the same here. It's easy to move the lines. I don't have "7" in roof design, and I don't understand what Dicam (6-6) is for.

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    Hi Thorvald,
    Mammut found the mistake, I had this problem in a building, too. With distances between the surfaces it works.
    With the options number 7 (Dietrichs Version 6.0x) in roof design you can build elements with all your rafters and purlins in it and 6-6 in DICAM is for making packages of your material and elements.
    Sorry for my bad english, I hope you can understand what I mean :oops: ;)

    Es grüßt der Doug

    Yes - the mistake is found! It works fine now. So maybe option 7 in roof design is what I have been asking for elsewhere? because we are working with prefabricated elements (cassettes) in the roof, in the same way as prefabricated walls etc. What can this option 7 do? What functions is in this option? Can I see somewhere a detailed description of the different options to the software?


    What do you mean with packages of materials and elements? And do I need it? Because if element option in roof design basicly works like wall design and ceiling design - then I think I would have what I need. Maybe you say that Diacam 6-6, can make material lists that are element wise for the roof also - but is it not already so in wall design t.ex?


    It's ok doug - I understand your english - it's not so bad though!!.... :);)

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

    Hi Thorvald,
    I think, someone of the Dietrichs Team could better explain the functions #7 from roof design. This is exactly for prefabricated roof-elements.
    With DICAM 6-6 you can place the material lists exactly for each element ( Dietrichs: I hope, I´m right) :lol: :lol:

    Es grüßt der Doug

    with the function elements in roof design you can define elements and you can add beams and panels a nd so on. I think if ypu're working with prefabricated elements is this the best way for you.

    Gruss Mammut

    Well, very interesting! Also the element module for suspended floors.

    Sincerely Yours. M. Sc. E. Thorvald, Denmark
    (Dietrichs version 7.03).

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden